Gear Couplings & Mechanical Drives

High-torque crowned-tooth flexible gear couplings, forged alloy steel sleeves, and heavy-duty torsional power transmission solutions engineered for severe industrial drives.

Mechanical Power Transmission • Direct Industrial Sourcing

Crowned-Tooth Flexible Gear Couplings

Cross Section Cutaway of Crowned Tooth Flexible Gear Coupling At SIMPLEX, we supply a comprehensive range of heavy-duty, torsionally rigid flexible gear couplings engineered to transmit massive torque while effectively compensating for angular, parallel (radial), and axial shaft misalignments in demanding industrial drivetrains.

Highlighting our specialized mechanical drive range is the crowned-tooth gear coupling (illustrated in the cross-sectional cutaway alongside). The design incorporates twin symmetric forged hubs featuring barrelled exterior gear teeth with triple-crowned geometry (crowned flank, crowned tip, and chamfered tooth edges) that mesh smoothly with the internal straight spur gear teeth of the flanged outer sleeves.

Manufactured from high-tensile forged carbon and alloy steel (such as AISI 4140, 42CrMo4, and EN9/EN19), the assemblies feature precision-honed tooth flanks, high-strength bolted shroud flanges, O-ring grease seals, and dual threaded lube plugs. This configuration guarantees high power density, minimum backlash, continuous grease retention, and extended operating life under severe shock and reversing loads.

We source and supply certified gear couplings from leading mechanical drive manufacturers like:

» Elecon Engineering » Radicon Transmission » Flender (Siemens) » Rexnord / Falk » Lovejoy (Timken) » Esco Couplings » Renold Power Transmission » Fenner India
"At Simplex Trading Company, you do not have to pay a premium for Quality."

Industry Segments & Mechanical Drive Applications:

Steel Rolling Mills & Continuous Casting Drives Heavy EOT Cranes, Hoists & Winch Drums Cement Plants, Ball Mills & Rotary Kilns Mining Conveyors, Crushers & Bucket Elevators Power Generation Turbines & Boiler Feed Pumps Paper & Pulp Machinery Calendar Rolls Sugar Mill Cane Crushers & Mill Turbines Rubber & Plastic Extruders and Internal Mixers Marine Propulsion Shafts & Deck Winches Oil & Gas Mud Pumps & Rotary Drilling Tables
Engineered Mechanical Drive Fleet • AGMA & ISO Certified

Our Range of Gear Couplings & Technical Specifications

The following standard and custom-engineered gear couplings are available for dynamic balancing certification, pre-dispatch torque verification, and swift project staging:

01.

Full-Flexible Crowned-Tooth Gear Couplings (Double Engagement)

Standard double-engagement design (as featured in our cutaway profile) consisting of two flexible hubs meshing with two connected flanged sleeves. Accommodates angular misalignment, parallel offset, and axial end float between driving and driven equipment.

Specification Available Upon Request
Coupling Size Code Nominal Torque (kNm) Max Bore Diameter (mm) Max Allowable Speed (RPM) Max Angular Misalignment
SGC-100 Series 1.90 – 3.20 kNm 52 mm 6,000 RPM ± 1.5° per mesh
SGC-150 Series 5.80 – 9.40 kNm 78 mm 4,800 RPM ± 1.5° per mesh
SGC-200 Series 14.50 – 22.00 kNm 110 mm 3,900 RPM ± 1.25° per mesh
SGC-300 Series 45.00 – 68.00 kNm 175 mm 2,800 RPM ± 1.0° per mesh
SGC-500 Series (Heavy Mill) 185.00 – 320.00 kNm 290 mm 1,650 RPM ± 0.75° per mesh
02.

Half-Flexible Gear Couplings (Single Engagement)

Engineered with one flexible crowned hub meshing with an internal gear sleeve, coupled to a rigid flanged hub. Ideal for floating shaft drive setups, three-bearing machinery trains, and extended spans where parallel misalignment is absorbed across dual single-engagement joints.

Specification Available Upon Request
03.

Heavy Mill-Duty Spindle & Reversing Roll Couplings

Heavy-capacity gear spindles manufactured with carburized, case-hardened, and nitrided gear teeth to deliver superior surface hardness (58–62 HRC). Designed for roughing stands, finishing rolling mills, slabbing lines, and high shock reversing loads.

Specification Available Upon Request
04.

Brake Drum & Brake Disc Gear Couplings

Specialized gear coupling assemblies incorporating integral cast steel brake drums or ventilated brake discs for shoe and caliper brakes. Widely specified on overhead crane hoist drives, port container gantry drives, and conveyor emergency holding systems.

Specification Available Upon Request
05.

Crowned Tooth Design & Lubrication Specifications

Proper lubrication and tooth geometry are fundamental to gear coupling longevity. Our crowned-tooth configuration prevents end-of-tooth loading, distributes stress evenly, and preserves lubricant film integrity under heavy continuous duty.

Specification Available Upon Request
Design Element Standard Engineering Value Operating Benefit Maintenance Standard
Tooth Curvature Profile Fully Crowned Flank, Tip & Chamfer Eliminates edge concentration stress AGMA Class 9 or better
Lubrication Medium High-Adhesion EP Gear Grease (NLGI 0/1) Maintains extreme-pressure boundary film Inspect every 6 months / 3,000 hrs
Seal Construction Molded NBR / Viton O-Rings & Lip Seals Zero grease leakage, excludes airborne grit Rated -30°C to +120°C continuous
Parallel Misalignment Up to 1.5 – 3.0 mm (Full Flex models) Protects driving motor & gearbox bearings Dial indicator laser alignment verified